3m x 30cm Arriostrada Tower section, Galvanized by Immersion, Up to 30 m Elevation. Wetlands.

  • 4d3905cac85a02473096346f09f6df4f
1 1
  • Norma ISO 9001:2015 para alta calidad
  • Galvanizado en caliente según NMX-H-004-SCFI-2008
  • Resiste vientos hasta 200 km/hr
  • Carga máxima de 200 kg por tramo
  • Estructura de acero A-36 resistente a corrosión

500 in stock

Modelo: STZ-30G

Proveedor: SYSCOM TOWERS

Código SAT: 43222903

Tax included. Shipping calculated at checkout.
Our Commitment ×
By purchasing this product you are making a positive impact. We contribute of each sale and we’ve partnered with WeAreGoodness.io
Let’s do some good
View full details

Highlights:
  • Product manufactured under standard: ISO 9001:2015.
  • Each section is manufactured by numerical control machinery.
  • Includes hardware for installation.
  • Recommended for humid areas or in environments with moderate corrosion.
  • According to the hot dip galvanizing standard NMX-H-004-SCFI-2008, ASTM A-123 and ISO-1461.
Physical Characteristics:
  • Maximum Load: 200 Kg.
  • Maximum height: 30 m. (10 sections)
  • Wind Resistance: 200 Km/hr.
  • Material: Tubo industrial 7/8" (Cal.18).
  • Semiflecha (Zig-zag): Redondo 5/16".
  • Nipple: 10 cm.
  • Face width: 30 cm.
  • Weight: 13.5 Kg.
  • Dimensions: 3 m length
  • Frame material: Steel (A-36).
  • For maximum load recommendations, this must be evaluated in conjunction with the engineering department.
  • Installation of dishes without Radome is not recommended.
  • Anti-corrosion protection: Hot dip galvanizing (NMX-H-004-SCFI-2008)
Application:
  • Point-to-Point Systems.
  • Point - Multipoint System.
  • Cellular signal amplification.
  • Lightning rod systems.
  • Repeating base radios.
  • Monitoring points.
  • Iluminación.
  • Emergency audible signaling.
  • And more.

Highlighted technical notes:

  • Make sure the installation is performed by a trained professional.
  • Schedule a maintenance plan to check tension on retainers and tighten bolts.
  • Do not install solar panels higher than 6 meters. Check compatibility between solar cells and mounts.
  • A stress study must be performed when placing an eccentric load on a tower. This can cause excessive torsion and bending in the tower causing structural failures.
  • Every dish antenna must have a radome as an accessory to reduce wind drag.
  • Dishes larger than 2 feet (60 cm) in diameter are not recommended for use on this tower (check with engineering).
  • The declared weight is for the equipment without accessories and without packaging.
  • The towers can be purchased in complete kits. SEE TOWER KITS.

Warning:

  • Hot dip galvanizing is recommended for humid areas, salty and/or corrosive environments, industrial parks with gas release (SEE MAP OF AREAS).
  • The tower must be painted according to (at least) CFE specification D8500-02 (7 symmetrical stripes of orange and white colors alternating, starting and ending in orange.
  • It must include night lighting, at least two lights, one in the middle and another at the top.
  • Local regulations should be consulted according to the municipality to ensure a correct and legal tower installation.
  • We recommend at all times following the recommendations for retaining installation: SEE RETAINER INSTALLATION DIAGRAM.

Torres Inductive Course Video 1st and 2nd part.