Kit with 3 m Telescopic Mast with Installation Accessories (Does not include retainer).

  • c34e5ce6608af191290497a7f908c1e8
  • c34e5ce6608af191290497a7f908c1e8
1 2

Low stock: 7 left

Modelo: KIT-SLM-3

Proveedor: SYSCOM TOWERS

Código SAT: 30241509

Tax included. Shipping calculated at checkout.
Our Commitment ×
By purchasing this product you are making a positive impact. We contribute of each sale and we’ve partnered with WeAreGoodness.io
Let’s do some good
View full details

The kit includes the following components:

Amount Model Description
1 pc. SLM3 Telescopic mast set for a height of 3m.
Includes: 1 1/4" 3m section
1 pc. SLM-BA-5G Base with oppressors for hot-dip galvanized mast.
1 pc. SLMBR Mast bracket for retaining hold.
3 pcs. SLM-ANG-2G Plate anchor for hot-dip galvanized concrete.
6 pcs. NECK-14HDG Collar for retention cable.
12 pcs. NUDO316FJG Knot for hold-down cable

Does not include retention cable, 15 meters of 1/8" retention are recommended ( SRET-318 or SRET-318-CAM )

Technical note:

Tensioners can be used to facilitate the adjustment of the TENL-1/4OGS model cable (Not included).

The bases do not include studs. They may vary depending on the type of soil. For example, for concrete you can use 6 ANC-Z-38T anchors (Not included) for the fin anchors and 3 pieces of ANC-AA-38-300 for the base (Not included).

It is recommended for equipment with dimensions less than 6 kg and dish antennas less than 25 cm. diameter

The use of masts is limited to the load capacities and area indicated on each mast.

All masts should be secured with retainers or at least galvanized wire of a good gauge.

Do not climb directly or rest ladders on this telescopic mast.

To adjust equipment installed on said mast, it is recommended to use ladder-type ladders or scaffolding, this in its retracted position at the minimum height of 3 meters corresponding to the first section.

Mooring recommendation.

Installation recommendations.

Check that the surface is flat and rigid, Installation on concrete using expansive plugs is recommended.
It is recommended to extend the mast once installed in its base (vertical position) and with the respective pre-installed tie rods for quick tensioning.
The final tensioning of the hold-down is necessary to provide rigidity to the equipment.
Where possible the equipment should be installed when the mast is already installed correctly.

Ideal for UBIQUITI Wireless Equipment or similar.

 




Fin type anchor.



Mast Base.




Retention Fastening Bracket.




Union between Sections.