ePMP 3000 MU-MIMO 4X4 802.11ac Base Station, 4910-5970 MHz, 120 Subscribers, Up to 1.2 Gbps (C050910A101A)





802.11ac
WAVE 2 MU-MIMO
4x4 32
dBm PMP
Up to 1.2 Gbps
QUALITY OF SERVICE A powerful multi-level prioritization scheme that can be configured by the network operator to enable the delivery of differentiated services. |
SECURITY 128-bit AES encryption, L2 and L3 firewall rules, compatibility with different user levels, HTTP/SSH support provides enhanced security.
|
FLEXIBLE MODES OF OPERATION Provides extremely low latency for PmP deployments, highly scalable mode with GPS synchronization and TDD operation for synchronized towers
|
NEW CHANNEL SIZE AND MODULATION Supports channel size configuration from 20 MHz to 80 MHz and modulates up to 256 QAM |
INTEGRATED LIVE SPECTRUM ANALYZER
Supports constant monitoring of the radio spectrum and allows live action without dropping the link.
MIMO and modulation | MU-MIMO 4x4 / 256 QAM-5/6 |
Frequency range | 4910 – 5980MHz (defined by country of operation) |
Power Range | 0 to +32 dBm (combined, depending on EIRP allowed in region) |
Channel Width | 20Ι40Ι80Mhz |
Maximum power consumption | 25W Maximum |
Exterior protection / Temperature | IP55 / -30º to +55ºC |
Management | HTTPs, SSH, SNMPv2c |
Subscribers by Sector in PMP | up to 120 clients |
DSO | Dynamic frequency optimization |
Ethernet structure | 10/100/1000BaseT, self-negotiation, 802.3at & SFP Auxiliary Port |
Protocols used | IPv4, UDP, TCP, IP, ICMP, SSH, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping |
VLAN | 802.1Q with 802.1p priority |
Input voltage | 44 to 59V |
Dimensions / Weight | 22.2 x 12.4 x 4.5cm / .7kg |
Antenna connector Antenna | 4 x 50 ohm, SMA H Inverse |
GPS | GPS antenna included |
Warranty | 3 years |
PoE included and electrical connection cable
Version up to 120 subscribers
Smart filter Noise is always a concern, and as more transmitters are deployed, will continue to be
a critical factor in the operation. Although almost all radios have some type of filtering, many use
Static filters that block only noise from outside the radios' total operating spectrum. Yes ok
This provides a clear channel for operation, These systems with fixed filters still allow noise to
of neighboring channels affects system performance. Cambium Networks solutions use the
dynamic filtering with a static filter to block noise from outside the operating spectrum, but also
a dynamic filter to block interference from adjacent channels. As the system changes to
another channel, The system automatically blocks noise from adjacent channels to improve the quality of
the signal.
|
![]() |
Frequency reuseThe frequency is limited. There will never be more of that. By reusing frequencies when deployed in a back-to-back configuration, a network operator can effectively use the same frequency twice to connect users. In large implementations, A network operator can connect thousands of users by reusing the same frequencies in the field service area. This technology maximizes the use of available frequency and can provide access to thousands of users on a small amount of spectrum. |
|
GPS synchronizationWhen networks become denser, self-interference becomes a problem. GPS synchronization coordinates the entire network, reduces self-interference and keeps network performance high as more more subscribers. |
![]() |
Smart Beamforming and Beam SteeringAs more emitters are deployed in the service area, It is important to mitigate noise and interference to provide reliable high-speed connectivity. The access point ePMP 3000 works in conjunction with the optional beam steering antenna to create narrow beams in the uplink to improve the signal to noise ratio. Located at the access point of a tower, The smart antenna will create tighter beams to connect with subscribers while overriding radiation from unwanted emitters in the field. |
|
Air FairnessePMP employs a sophisticated starvation avoidance algorithm based on priority and air fairness to allocate RF resources to SMs. Assignments are based on airtime rather than performance, so we avoid the situation where SMs in poor RF conditions consume an excessive amount of time and, therefore, available capacity. |
![]() |
cnMaestro |
LINKPlanner |
cnArcher |
cnHeat |
cnMaestro™ is an on-premise or cloud-based software platform for secure end-to-end network control. cnMaestro Wireless Network Manager simplifies device management by offering complete network visibility and touchless provisioning. View and perform a full set of wireless network management functions in real time. Optimize system availability, Maximize performance and meet the emerging needs of business and residential customers. |
LINKPlanner allows you to model "what if" scenarios (based on geography, distance, antenna height, transmit power and other factors) to optimize system performance before purchase. Quickly design networks for optimal deployment and profitability with ease. Available for Microsoft® Windows® and Mac® systems, is a free and easy to use link design tool. LINKPlanner leads the industry as the most reliable and intuitive RF link planning tool, with tens of thousands of links successfully deployed around the world. |
Raise the bar on installation accuracy with cnArcher™, The free mobile app that provides field technicians with the information they need to properly configure and align Cambium Networks PMP and ePMP wireless broadband subscriber modules. |
Built on Cambium Networks' experience in RF planning, propagation and modeling as seen in LINKPlanner and integrated with GIS data up to 1 meter accuracy, cnHeat generates highly accurate RF predictions and derived services that accurately represent the reality of the RF world. |
B5lite