Control for repeater, includes cabinet.

Now from SYSCOM you get a COR ready to manufacture repeaters in a matter of minutes. Simply plug two radios into the accessory connector and they will function as a repeater. The COR is already pre-calibrated. It also operates bidirectionally, Therefore, your repeater will automatically be a double repeater if you do not program the Tx of one of the radios to "set". This is the cheapest and fastest way to have a repeater operating. With the KTS-10 or ITS-10 it is now possible to install repeaters anywhere, even inside buildings.

-Typical connections: Discriminator or COS, microphone or TX flat input, PTT, +12 Vdc and ground.
-Has decay time adjustment and CTCSS encoder/decoder connections.
-Small size. Comes in a metal case to prevent interactions with radios.
-Ready to connect to your radios via female DB15 connector, includes installation manual.
-Adjustment of fall time and courtesy tone.
-Small size.

NOTE: On ICOM IC-F121S and ICF221S radios you do not require RP4, Well, it is already integrated into the radio. Your ITS-10 PLUS is more than enough.
NOTE: Repeaters manufactured with KTS00-10 or KTS-10 cannot be used as a Base Station.