Cylinder for calibration of Propane gas detectors C3H8 34L at 10% LEL MACURCO

The Macurco 6 and 12 series family of detectors require routine testing and calibration. Each detector has a corresponding test/calibration kit to test and calibrate the detectors in the field. Sensors may become less accurate over time, Therefore, it is recommended to have a maintenance plan to ensure that the detectors respond to the presence of gas appropriately. A gas calibration is the process of exposing a sensor to a target gas at a specific concentration and then adjusting the gas detector to read that gas concentration correctly. Macurco recommends testing and calibrating at least once a year at a minimum, but depending on the site and the risk potential of the application, may be needed more frequently. Check with local authorities for specific local regulations.

FOR EXCLUSIVE USE WITH MACURCO GD-6 DETECTOR, GD-12 and Cal-Kit 1

 H280 - Contains GAS UNDER PRESSURE may EXPLODE if heated
 May cause organ damage 
Product description: Calibration gas mixture composed of methane and nitrogen. 
If the gas is released, it can replace oxygen and quickly cause asphyxiation.
 P410+P403 Protect from sunlight. Store in a well ventilated place.