90L Solar Low Pressure 9 Vacuum Tubes with Higher Strength and Food Grade Stainless Thermoque Hail Resistant Up to 25mm/L Includes Magnesium Anode

  • d50b0a8b5df0f35621be26a490172b72
  • 8acafb60330c3b359b8cebfb1e747ce7
  • d6c06835be94c59d970926c5532794a6
  • fe3685d9bd1374cb9f889bec8f48103c
  • c397c593f7ec68c524487bdee9829d7f
1 5
  • Easy installation
  • Tank with stainless steel interior coating
  • Thermal isolation

200 in stock

Modelo: STE-LPWH90

Proveedor: EPCOM

Código SAT: 40102002

Tax included.
Our Commitment ×
By purchasing this product you are making a positive impact. We contribute of each sale and we’ve partnered with WeAreGoodness.io
Let’s do some good
View full details

The solar low pressure water heater is the best solution for saving daily fuels such as LP gas & comma; Natural Gas & comma; that generate large amounts of pollutants and the cost is very high. Its field of application goes from Houses room & comma; shops & comma; restaurants & comma; gyms & comma; recreational parks & comma; Hotels industries and all installation that requires hot water service.

Content

  • It has a 90 L thermos tank
  • Vacuum tubes
  • Stainless steel structure
  • Enough hardware for installation
  • Magnesium anode
  • packaging

In these diagrams, the water pressure of the Property will be the pressure obtained by kinetic energy from the storage tank & comma; in all facilities the water storage tank must remain at a higher level of the solar boiler & comma; a minimum drop of 1.2 meters is recommended. (It does not include any installation accessories only all parts of the tank & comma; glass tubes & comma; and metal structure of the heater.)

Installation Diagram of a Low Pressure System without Hot Water Backrest

Installation diagram of a low pressure system with hot water backing

Installation Diagram of a System With Pressing Pump and Hot Water Backup

Connections Tank

  1. Cold water inlet. 3/4 Male X35 mm Stainless Steel (SUS304)
  2. Water ventilation. 1/2 Hembrax25mm Stainless Steel (SUS304)
  3. Hot water outlet. 3/4 machox35mm stainless steel (SUS304)
  4. Maintenance output. 3/4 Stainless Steel Female (SUS304)
  5. Copper plug for water drainage and equipment maintenance. 3/4 Macho

Considerations and Precautions

  • NOT INSTALLING WITHOUT TINACH IN ADDRESS & comma; AS DAMAGE MAY CAUSE ON THE THERMOTANK GENERING WATER LEAKES.
  • The images may vary slightly to the product in physical.
  • Handle with care & comma; avoid removing any protection during transportation and when handling.
  • Take special care of the handling of glass tubes & comma; they are extremely delicate & comma; do not aventar & comma; estribar & comma; hit.
  • Transfer or manipulation of the components of the boiler between two people.
  • It is recommended to regularly clean the water inlets and outlets of the boiler as well as its breathing entry to avoid corrosion damage. (Remove the tartar that accumulates in the entries) (every 3 months)
  • In places where the water is very salty it is recommended to maintain and change the magnesium bar of the equipment every 3 months. It is necessary to drain all the residues that can be found in the heat tank or evacuated tubes & comma; It is possible to use descaling liquid or a mixture of 50% water and 50% vinegar and rinse with plenty of water.
  • Anchor the legs of the boiler before filling with water.

BOILER SOLAR

How to arm Solar boiler Unboxing of solar Boiler

Aerial view solar boiler EPCOM

Panoramic view of Boiler Solar EPCOM

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)